Tag: sheet metal fabrication

  • Sheet metal PC chassis

    Sheet metal PC chassis

    Steel plate: steel plates must be thick. Shop around. You can feel what is thick and what is thin by tapping with your fingers. Painting: for a qualified cabinet, all steel needs painting, and the painting must be average, so that it can be well rustproof and dustproof. Structure layout: Generally speaking, there are many […]

  • Principles of design and installation of metal cabinet

    Principles of design and installation of metal cabinet

    1、 In the principle of convenient installation, the hanging beam is adopted, which is convenient and flexible for installation and movement. 2、 The principle of internal shielding is to adopt high-density mesh front and rear to ensure the shielding inside the cabinet. 3、 Considering the load-bearing factors, the reinforced fixed tray is attached with reinforcing […]

  • Customized processed sheet metal parts

    Customized processed sheet metal parts

    Materials commonly used in sheet metal processing include cold rolled sheet (SPCC), hot rolled sheet (SHCC), galvanized sheet (SECC, SGCC), copper (Cu) brass, red copper, beryllium copper, aluminum sheet (6061, 5052, 1010, 1060, 6063, hard aluminum, etc.), stainless steel (mirror, wire drawing surface, fog surface), 1. Cold rolled sheet SPCC, mainly used for electroplating and […]

  • Installation of aluminum sheet metal parts

    Installation of aluminum sheet metal parts

    Aluminum profile + sheet metal parts are a good combination, which can be used on the hood, chassis, protective cover, etc., to prevent dust, noise, protect personal safety and so on. Moreover, there are many colors of sheet metal parts, such as yellow, blue, red, etc. when used on mechanical equipment, they are more conspicuous […]

  • Stainless steel sheet metal cabinet

    Stainless steel sheet metal cabinet

    All conductive parts are made of copper busbar series or pure copper plate according to gb5585-85 rules, and the surface plating is made according to the requirements of the drawing. If bending is required, annealing treatment shall be carried out before bending, and the bending fillet radius shall be greater than the thickness of the […]

  • What is a sheet metal bracket?

    What is a sheet metal bracket?

    One of the simplest and most cost-effective methods of manufacturing brackets, especially simple brackets such as corner brackets, is sheet metal manufacturing. The bracket is usually composed of two or more planes connected along an edge. The easiest way to make this object is usually to bend a flat object (i.e. a metal plate) at […]

  • Sheet metal case structural

    Sheet metal is generally some sheet metal through manual or die stamping to produce plastic deformation to form the desired shape and size, and can further form more complex parts through welding or a small amount of machining. For example, chimneys, iron buckets, oil tanks, oil pots, ventilation pipes, funnel-shaped, etc. commonly used in families, […]

  • Customized outdoor communication cabinet

    Customized outdoor communication cabinet

    Outdoor communication cabinet is a kind of outdoor cabinet, which refers to the equipment made of metal or non-metallic materials under the direct influence of natural climate, which does not allow unauthorized operators to enter the cabinet for operation, and provides outdoor physical working environment and safety system for wireless communication stations or wired network […]

  • Requirements for sheet metal cabinet design

    Requirements for sheet metal cabinet design

    When designing the sheet metal cabinet, we should first clarify the design performance of the sheet metal cabinet, and on this basis, use various new process design sketches, specify the size and structure, and determine the strength to make the technical parameters of the cabinet meet the design requirements. Give full play to the performance […]

  • Customer requirements for sheet metal chassis processing

    Customer requirements for sheet metal chassis processing

    Materials. The plastic of the front panel of the good chassis is made of ABS engineering plastic, which is firm and stable. If the plastic used in the chassis is not hard or brittle enough, it is easy to crack, and there will certainly be quality problems. The steel plate shall be at least 0.8mm, […]