Tag: sheet metal bracket

Steel plate: steel plates must be thick. Shop around. You can feel what is thick and what is thin by tapping with your fingers. Painting: for a qualified cabinet, all steel needs painting, and the painting must be average, so that it can be well rustproof and dustproof. Structure layout: Generally speaking, there are many […]

1、 In the principle of convenient installation, the hanging beam is adopted, which is convenient and flexible for installation and movement. 2、 The principle of internal shielding is to adopt high-density mesh front and rear to ensure the shielding inside the cabinet. 3、 Considering the load-bearing factors, the reinforced fixed tray is attached with reinforcing […]

Materials commonly used in sheet metal processing include cold rolled sheet (SPCC), hot rolled sheet (SHCC), galvanized sheet (SECC, SGCC), copper (Cu) brass, red copper, beryllium copper, aluminum sheet (6061, 5052, 1010, 1060, 6063, hard aluminum, etc.), stainless steel (mirror, wire drawing surface, fog surface), 1. Cold rolled sheet SPCC, mainly used for electroplating and […]

Aluminum profile + sheet metal parts are a good combination, which can be used on the hood, chassis, protective cover, etc., to prevent dust, noise, protect personal safety and so on. Moreover, there are many colors of sheet metal parts, such as yellow, blue, red, etc. when used on mechanical equipment, they are more conspicuous […]

All conductive parts are made of copper busbar series or pure copper plate according to gb5585-85 rules, and the surface plating is made according to the requirements of the drawing. If bending is required, annealing treatment shall be carried out before bending, and the bending fillet radius shall be greater than the thickness of the […]