General inspection standard for sheet metal chassis

  1. The sheet metal chassis is not allowed to be tilted or partially tilted with the naked eye. The verticality between the frame column and the base is less than 1.5mm. During the inspection, the upper surface of the base is taken as the benchmark, and the inner edge surface of the upper end of the column is taken as the measuring point.
  2. The parallelism between the top frame and the base of the sheet metal chassis is less than 1mm. The inspection points are the upper surface of the base and the lower surface of the top frame, and they are benchmarks for each other. It can also be detected by measuring the length of the diagonal of the six sides, and the difference shall not exceed 2.5mm. If there is a middle partition, the parallelism between the top frame and the base can be widened to 1.5mm, and the parallelism between the middle partition and the top frame or base is less than 1mm.
  3. The absolute value of the diagonal difference between the upper and lower frames of the sheet metal chassis is less than 1.5mm.
  4. The column of the sheet metal chassis shall not be twisted, and the parallelism between the junction line at both ends of each column and the upper and lower enclosure and the adjacent plane of the enclosure shall be less than 0.5mm.
  5. For the slideway supporting the plug-in box, the parallelism of the working surface composed of the left and right slideways on the same layer with respect to the upper surface of the base is 1mm, and the sheet metal chassis should ensure that the absolute value of the gap between the adjacent two panels after the plug-in box is installed should not exceed 0.6mm.

Quick Links: Sheet Metal Parts Components | Aluminium Bow Mount Bracket | Sheet Metal Frame | 4×4 Corner Brackets | Sheet Metal Chassis | Powder Coating Small Parts | China Sheet Metal Manufacturer | Sheet Metal Cover | Metal Frame Brackets | Sheet Metal Mounting Brackets | Sheet Metal Brackets | Kiosk Enclosure Manufacturer | Metal U Bracket | Sheet Metal Enclosures | Custom Sheet Metal Parts | Metal Enclosure Manufacturers | Sheet Metal Cabinet | China Sheet Metal Parts | Sheet Metal Bracket | Sheet Metal Parts Manufacturer | Sheet Metal Mounting Bracket | Custom Electrical Enclosures | Outdoor EV Charger Enclosure | Custom Sheet Metal Boxes | Custom Steel Parts | Sheet Metal Components | Sheet Metal Prototype | Prototype Sheet Metal Parts | Custom Sheet Metal Enclosures | Sheet Metal Box | Precision Sheet Metal Frames | Metal Enclosure Manufacturer | Prototype Sheet Metal | Custom Made Metal Parts | U Shaped Bracket | Sheet Metal Box Fabrication | Sheet Metal Bracket | China Metal Manufacturing | Stainless Brackets Marine | Custom Aluminum Parts | China Custom Aluminum Parts | Aluminum Parts Manufacturing | Metal Manufacturing in China | Custom Electrical Enclosures | Custom Electrical Enclosures Manufacturer | Custom Aluminum Enclosure | China Metal Parts Manufacturer | Sheet Metal Contractor | Sheet Metal Contractors | Custom Metal Enclosure | Sheet  Metal Contracting | Custom Metal Manufacturing | Sheet Metal Companies | Sheet Metal Service | Sheet Metal Services | Sheet Metal Fabrication Services | Galvanized Sheet Metal | Sheet Metal Laser Cutting | Sheet Metal Laser Cutting Parts | Custom Laser Cut Parts | Sheet Metal Production | Sheet Metal Production | Sheet Metal Manufacturing Companies


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *