Tag: sheet metal bending
-
Hydraulic sheet metal bending machine
The bending radius of sheet metal is a value required in the sheet metal drawing, which is difficult to determine in actual processing. In fact, the bending radius of the sheet metal is related to the material thickness, the pressure of the NC bending machine and the width of the lower die groove of the […]
-
How to determine the bending sequence of sheet metal bending?
General bending sequence Short side first and then long side: Generally speaking, when there are bends on all four sides, the short side first and then the long side is conducive to the processing of workpieces and the assembly of bending molds. First the periphery and then the middle: under normal circumstances, it is generally […]
-
Common problems in bending process
Sheet metal processing manufacturers generally have many kinds of processes, and bending process is one of them, which is often used. Problems are inevitable in this processing process. Then I will introduce you how to solve the problems encountered in the bending process. There are many common problems in the bending process. Here are three […]
-
Bending problems to be considered in sheet metal design
The design needs to consider what is processing before forming and what is processing after forming. Considering that in the process of work production, some holes must be bent first and then processed: round holes, square holes, waist round holes, threads, etc. close to the bending edge need to be processed during blanking. If the […]
-
What should be paid constant attention to and ensured when bending sheet metal parts？
1.Avoid bending failure due to the failure of material pressing at the bending root When bending sheet metal, other features are often too close to the sheet metal, resulting in failure to press and unable to bend or serious bending deformation. Generally speaking, a distance of at least twice the thickness of the sheet metal […]
-
A summary of some bending elements
Bending is a stamping process that uses pressure to force the material to produce plastic deformation, so as to form a certain angle and curvature shape. Common bending includes V-shaped bending, Z-shaped bending and reverse bending. The following is a summary of some bending elements ： Bending height The bending height shall be at least […]